FXC611 Economical Salt Water Spray Testing Machine

INTRODUCTION

APPLICATION: 

Used for surface treatment of various materials, including coating, electroplating, organic and inorganic coatings, anodic treatment, anti-rust oil and other anti-corrosion treatment to test the corrosion resistance of products.

STANDARDS: 

NSS, ACSS, CASS, CORK and other standards.

Instrument characteristics:

1. Defogging system: air pressure defogging mode, which uses air pressure to exhaust the fog in the laboratory, so that the cabin is not affected by salt fog.

2. Adopt automatic / manual water adding system: the function of automatically supplementing the water level when the water level is insufficient, and the test will not be interrupted.

3. Precision glass nozzle: ﹙PYREX﹚ mist diffuses evenly and naturally falls on the test piece, ensuring no crystal salt blockage.

4, with double overtemperature protection: insufficient water level warning to ensure safe use.

5. The laboratory adopts direct steam heating, which is fast and uniform and reduces standby time.

6. The spray tower is equipped with a conical disperser, which has the functions of guiding fog, adjusting fog amount and evenly dropping fog amount.

7. The saturated air tank is heated and humidified by Henry's law, and the humidity required for the test is provided.

8. The panel is made of special aluminum and has metal keys, which are sensitive to operation and not easy to damage.

9. The core control components are Italy's 32 - bit multi-functional motherboard.

10. The instrument includes Chinese and English interfaces to facilitate the inspection of foreign customers.

11. The surface of the instrument is treated by electrostatic spraying process.

Technical parameters:

1. Laboratory temperature: brine test (NSS ACSS) 35 ℃ 1 ℃ / corrosion resistance test (CASS) 50 ℃ 1 ℃

2. Temperature fluctuation: ±1℃

3. Temperature uniformity: ±1℃

5. Pressure barrel temperature: brine test method (NSS ACSS)47℃±1℃/ corrosion resistance test method (CASS)63℃±1℃

6. Salt water temperature for spray test: 35℃±1℃ 50℃±1℃

7. Salt spray deposition: 1.0 ~ 2.0 mL / 80cm2 / h (collected for at least 16 hours and averaged)

8. Salt water concentration: 0.26g of copper chloride (CuCl2 2H2O) is added per liter in the concentration of sodium chloride solution of 5 % or the concentration of sodium chloride solution of 5 %

9. Relative humidity of laboratory: above 85 %

10. Spray mode: programmable spray (including continuous spray and intermittent spray)

11. Test time: 180HR

12. Power supply: 220V,3.1KW